Length:follow customer's requirements
Min order:1 set
Material:follow customer’s requirements
For more dimensions and drawings about industrial cardan shaft, you can click "Service" and download.
The following are dimensions and drawings of SWC-BH cardan shaft with length compensation as a model.
Please advise us the main sizes, such as diameter of across assembly, total length, and the swing diameter of flange, then we can provide you our drawings according your request, or please advise us the model you are using now.
Our min order is 1 set. Most of our cardan shaft products are Customized.
Each order from our factory, we produce black metallurgical machinery drive shaft after customer confirmed the drawing. So we didn't have stock. And since we are based on final customer confirmed drawings production, so before this, customer has any needs can be adjusted.
Quality is priority. We always attach great importance to controlling quality of black metallurgical machinery transmission shaft from the beginning to the end:
1) Firstly, we have QC department to control the quality of black metallurgical machinery transmission shaft, and we also accept the third official government to inspect our black metallurgical machinery transmission shaft before delivery.
2) Secondly, we have all detailed records for nonconformity black metallurgical machinery transmission shafts, then we will make summary according to these records, avoid it happen again.
3) Thirdly, We do observe the relevant codes of conduct & laws from government in environment, human right aspects, like no children labor, no prisoner labor and so on.
If you buy our black metallurgical machinery propeller shaft,we will provide follow services:
1. For domestic customers, when we receive customer complaints about black metallurgical machinery propeller shaft, we will send technicians to the spot, analysis the cause, and help solve the problem.
2. For customers abroad, we will ask them to send photos and vedios of the problem cardan shaft, our technicians will analysis the cause, and give the solve guidance to customers.
3. General speaking, there is no quality problem of our SWC-I150C-170B cardan shaft, we produce strictly according to the detailed drawing. The problem is always caused by wrong maintenance. Please note to add grease for the spline and cross cardan frequently. Usually once a month, for cars, once per 15 days.
There is no quality problem with our metallurgical machinery drive shafts so far. As long as the metallurgical machinery drive shafts are properly maintained, they can be used normally without after-sales service.
We are quite confident in the quality of our metallurgical machinery drive shafts.
Previous：Orange Light Duty Cardan Shaft