The drawing of steel light vehicle drive shaft is as follows:
Q:How could I know if the product suit for my machine or not?
A:Please tell me which light vehicle drive shaft you are interested in, or advise us the main sizes, such as diameter of across assembly, total length, and the swing diameter of flange, then we can provide you our drawings according your request, or please advise us the model you are using now.
our min order is 1 set. Most of our products are Customized. Each order from our factory, we always produce cardan shaft after customer confirmed the drawing. So we didn't have stock. And since we are based on final customer confirmed drawings production, so before this, customer has any needs can be adjusted.
How to do Dynamic balance test?
According to the customer's product r/min and accuracy level parameters of the dynamic balance test, if the test when the product problems, we will be at the end of the product or at both ends of the balance sheet, and then continue to dynamic balance test to know the results of the product test to meet the min and precision level parameters.
How to do manual measurement?
The inspectors measure the length of the drive shaft, the size of the flange, the number of holes on the flange and its diameter according to the drawing.
If you buy our light vehicle cardan shaft，we will provide follow services:
1.For domestic customers,when we receive customer complaints,we will send technicians to the spot,analysis the cause,and help solve the problem.
2.For customers abroad,we will ask them to send photos and vedios of the problem light vehicle cardan shaft,our technicians will analysis the cause,and give the solve guidance to customers.
3.General speaking,there is no quality problem of our light vehicle cardan shaft,we produce strictly according to the detailed drawing.The problem is always caused by wrong maintenance.Please note to add grease for the spline and cross cardan frequently.usually once a month,for cars,once per 15 days.