Cardan drive shafts are used together in many Jeeps. In the North American market, the Denali also uses these technologies to give you additional power and fuel efficiency.
The Power Steering is often said to be the better of the two systems, but it really depends on how much you use it. It is also important to check the Pressure Plate and Hydraulic Pressure Gauge which can help you to know how much pressure your pump is working at. But the Pressure Plate must be checked by a professional and it is not cheap.
There are many problems that you should be aware of if you are using a Power Steering and a cardan drive shaft. It is recommended that you use the Cardan Drive Shaft when you need extra power, but if you just want extra fuel economy then you can use the Power Steering.
In many countries like New Zealand, the cardan drive shaft is compulsory. If you are in New Zealand and have been fitted with a cardan drive shaft then this means that the manufacturer has used this technology in all their Jeeps.
This is also known as the Jon Max Drive Shaft and they are very good indeed, especially in snowy conditions. It is also recommended that you have it fitted in any new Wrangler that you buy because this will make sure that your Jeep always has the power it needs to cope with any kind of snow and rain. This will also mean that you will always have extra fuel on board when you get stuck out in the wilderness.
In the USA, the technology used to give you extra power is actually called a Direct Injection Turbo, and it has been around for many years now, but it is more of a bonus than anything else. So, if you don't want to take the risk of installing this technology you should probably go with a cardan drive shaft. These are also popular in the Japanese Market.
Many people are confused about how the cardan drive shaft works, so here is a quick explanation. The Drive Shaft connects to the turbocharger injects a charge into the combustion chamber, which turns the car wheels and starts the engine.
The prop shaft in the cardan drive shaft is attached to the back of the turbocharger, which in turn runs off of a standard Pinion Gear. This combination of components on the back of the cardan drive shaft is very efficient and allows the turbocharger to produce a lot of torque. It is important to know that this technology is not for everyone, so make sure that you do not install it unless you have no other choice.
If you are looking for something that is safer than a Power Steering then the cardan drive shaft is what you need. If you want to use it for power and fuel efficiency then the Cardan Drive Shaft is your best option. It is very common on the Jeep Cherokee and the Jeep Wrangler.
Another thing to consider is that there are many aftermarket kits that are available to fit all kinds of different types of Jeeps. If you are replacing a Drive Shaft with a Cardan Drive Shaft then you should be able to find a kit that will fit your existing turbocharger.
Wrenches are also supplied with the kit, which is used to get the connection right. All you need to do is attach the kit and plug it in, which will then be bolted onto the existing driveshaft.
Another benefit of using the cardan drive shaft for Wrangler is you get to know what conditions to expect in the area. Stiff roads or rough trails, you know what to expect. You also know if you need more or less spring pressure to handle the road or not. You can avoid a lot of trouble when you know where to set your shocks.