Cardan Drive Shaft: The Advantages of Different Types-Jiangsu Sitong Cardan Shaft Co.,Ltd DOCANDO INTERNATIONAL INDUSTRY CO.,LIMITED
Welcome To Jiangsu Sitong! We are Professional Cardan shaft manufacturer.
  +86-18651162958 丨  

Cardan Drive Shaft: The Advantages of Different Types

Views:604     Author:Cardan Shaft Manufacturer     Publish Time: 2020-07-07      Origin:Sitong Cardan Shaft Co.,Ltd

Cardan drive shafts are one of the best drive shafts available in the market. They are used in Formula One and NASCAR race cars, as well as the flight simulator market. Their popularity stems from their incredible strength and durability that are a result of very advanced technologies incorporated in them.

These drive shafts are manufactured using carbon fiber as the material to which the material is glued and wound around. It is placed into a mold by highly advanced machinery. The resin is poured inside it and the finished shaft is ready for use.

There are four main types of drive shafts available. This includes:

Open Mesh - Using a 2-piece construction of the shaft is then drawn through a smooth ring where it is secured. The ring has a small hole in it which is used to accept the eye-bolts on the ball joint and the linkage bolts for the chains.

Closed Mesh - A single ring is placed in the ring. Then the two separate shafts are held together with a brace on the left side. The left-hand side has a fixed chain to connect the left and right-hand shafts.

Jelq - This is the most modern and advanced type of racing shaft design. The advantages are the availability of higher speeds than a typical racing shaft, the increased speed being achieved due to the feature of using carbon fiber for the materials. There is also the increase in strength that can be gained due to the new blend of fibers used.

The modern cell design uses the traditional locking angle of the lock piece. However, the end linking bolts are used to link the shafts. In a jelq designthe non-locking locks are used to link the two shafts.

All three types of shafts mentioned are more suited to high speed racing, where speed and performance are of prime importance. These types of driveshafts are made using specific materials that will allow for greater speeds and a more durable shaft. If you are looking for a shaft for your Nascar car or Formula 1 racing car, you will want to buy one with carbon fiber as the primary material.

Some Nascar teams like Team Penske have a racing car that has an extremely low drag coefficient. In racing, drivers must have high speeds to be able to perform at their best. The lower the drag coefficient is, the faster a driver can go and the more power they can generate and put down.

The use of carbon fiber is one way that Nascar is able to provide drivers with top speed. High speed racing requires high speeds, so a driver needs to be able to control their car at high speeds. This is the reason the current generation of drivers are so successful.

The first product that Nascar came out with was the jelq. They came up with the jelq by combining several types of racing shafts into one. The jelq is not as aerodynamic as other types of racing shafts but it is still popular and very advanced.

Carbon fiber is an incredible material for making a shaft for racing. There are many types of carbon fiber shafts, like those made from carbon fiber and other types of composites. If you are interested in racing, then a carbon fiber shaft will benefit you greatly.

We have first-class production line and strict management system.

Contact Us

Jiangsu Sitong Cardan Shaft Co.,LTD
Tel : +86-523-84549777
Phone : +86-18651162958
E-mail :
Whatsapp : +86-18651162958
Skype :
QQ : 639068832

Contact Us

Copyright 2020  Jiangsu Sitong Cardan Shaft Co.,Ltd All Rights Reserved. 网站地图 Sitemap