Length:follow customer's requirements
Surface Treatment:Painting
Color:customized
Min order:1 set
Material:follow customer’s requirements
Quantity: | |
---|---|
For more dimensions and drawings about commercial vehicle drive shaft, you can click "Service" and download.
The following are dimensions and drawings of SWC-BH cardan shaft with length compensation as a model.
Production Process of commercial vehicle cardan shaft is as follows:
1. Raw material selection
2. Rough machining
3. Heat treatment
4. Precision work
5. Assemblage
6. Dynamic balancing testing
7. Painting
8. Inspect and package
9. Shipping
Our rigorous process ensures the flawless commercial vehicle propeller shaft.
We do manual measurement and dynamic balance test of commercial vehicle transmission shaft.
How to do manual measurement of commercial vehicle universal joint shaft?
The inspectors measure the length of the drive shaft by sitong, the size of the flange, the number of holes on the flange and its diameter according to the drawing.
How to do dynamic balance test of cardan shaft by sitong?
According to the customer's propeller shaft by sitong r/min and accuracy level parameters do the dynamic balance test, if any problems with the test, we will add the balance block at both end of the transmission shaft by sitong, and then continue to dynamic balance test to know the results of the universal joint shaft by sitong test to meet the min and precision level parameters.