The drawing of Industrial Parts PTO Cardan Shafts :
About our company:
①staff:our staffs have rich experience, at least 5 years working experience in this industry and 8 years working experience in related industries.
②equipment:the equipment processing flexible industrial cardan shafts is CNC.
③problem handling: once the problem of flexible industrial cardan shafts is found, the defective flexible industrial cardan shafts will be reworked immediately.
Q: How to control flexible industrial transmission shafts quality?
A: Quality is priority! We always attach great importance to controlling quality of flexible cardan shafts for forklift from the beginning to the end:
1) Firstly, we have QC department to control the quality of flexible cardan shafts for forklift, and we also accept the third official government to inspect our Industrial drive shafts for forklift before delivery.
2) Secondly, we have all detailed records for nonconformity flexible cardan shafts for forklift, then we will make summaryaccording to these records, avoid it happen again.
3) Thirdly, We do observe the relevant codes of conduct & laws from government in environment, human right aspects, like no children labor, no prisoner labor and so on.
We also do manual measurement and dynamic balance test.
Q: How to do manual measurement?
A: The inspectors measure the length of the flexible industrial transmission shafts, the size of the flange,the number of holes on the flange and its diameter according to the drawing.
Q: How to do dynamic balance test?
A: According to the customer's flexible industrial transmission shafts r/min and accuracy level parameters do the dynamic balance test, if any problems with the test, we will add the balance block at both end of the flexible industrial transmission shafts, and then continue to dynamic balance test to know the results of the flexible industrial transmission shafts test to meet the min and precision level parameters.
We strictly control the quality. Please be assured of buying our products.
The pto cardan drive shafts need regular maintenance to avoid problems.
How to maintain the pto cardan drive shafts?
1. Cleaning, dust removal, sand removal and mud removal are carried out for the key parts connecting the universal joint and shaft body. If the width is loose, further tightening is required.
2. Clean cross shafts, cross bearings, bearing needles, and reassemble with fresh butter. The bearing needle is the most easily damaged part, if there is any damage, it needs to be replaced.
3.Clean the spline shaft to remove dust and oil from the groove and surface.
4. The shaft sleeve is cleaned to remove oil, dust and sand from its interior.
5. After reassembling the transmission shaft structures after inspection and maintenance, refill each area with fresh butter, in order to increase its self-lubricating degree, reduce the wear in the process of its operation, which can increase the driving safety and service life of the component itself.