Length:follow customer's requirements
Surface Treatment:Painting
Color:customized
Min order:1 set
Material:follow customer’s requirements
Quantity: | |
---|---|
For more dimensions and drawings about industrial cardan shaft, you can click "Service" and download.
The following are dimensions and drawings of SWC-BH cardan shaft with length compensation as a model.
Our min order is 1 set. Most of our products are customized. Each order from our factory, we always produce cardan shaft after customer confirmed the drawing. So we didn't have stock. And since we are based on final customer confirmed drawings production, so before this, customer has any needs can be adjusted.
Production Process of industrial cardan drive shaft is as follows:
1. Raw material selection
2. Rough machining
3. Heat treatment
4. Precision work
5. Assemblage
6. Dynamic balancing testing
7. Painting
8. Inspect and package
9. Shipping
Our rigorous process ensures the flawless industrial propeller shaft.
We do manual measurement and dynamic balance test of industrial transmission shaft.
How to do manual measurement of industrial universal joint shaft?
The inspectors measure the length of the drive shaft yacht, the size of the flange, the number of holes on the flange and its diameter according to the drawing.
How to do dynamic balance test of transmission shaft yacht?
According to the customer's propeller shaft yacht r/min and accuracy level parameters do the dynamic balance test, if any problems with the test, we will add the balance block at both end of the cardan shaft yacht, and then continue to dynamic balance test to know the results of the universal joint shaft yacht test to meet the min and precision level parameters.