For more dimensions and drawings about industrial cardan shaft, you can click "Service" and download.
The following are dimensions and drawings of SWC-BH cardan shaft with length compensation as a model.
Our min order is 1 set. Most of our products are customized. Each order from our factory, we always produce cardan shaft after customer confirmed the drawing. So we didn't have stock. And since we are based on final customer confirmed drawings production, so before this, customer has any needs can be adjusted.
Production process of heavy equipment universal joint shaft is as follows:
1. Raw material selection
2. Rough machining
3. Heat treatment
4. Precision work
5. Assemblage
6. Dynamic balancing testing
7. Painting
8. Inspect and package
9. Shipping
Our rigorous process ensures the flawless heavy equipment universal joint shaft.
We do manual measurement and dynamic balance test of heavy machinery equipment cardan joint.
How to do manual measurement of heavy machinery equipment transmission shaft?
The inspectors measure the length of the heavy machinery equipment transmission shaft, the size of the flange, the number of holes on the flange and its diameter according to the drawing.
How to do dynamic balance test of industrial heavy equipment cardan shaft?
According to the customer's industrial heavy equipment cardan shaft r/min and accuracy level parameters do the dynamic balance test, if any problems with the test, we will add the balance block at both end of the industrial heavy equipment cardan shaft, and then continue to dynamic balance test to know the results of the heavy machinery equipment propeller shaft test to meet the min and precision level parameters.
