The process of how to remove the propeller shaft from outboard motors is something that is not as simple as you might think. If you really want to be able to finish this project, then there are a few things that you should know about the inner workings of these motors before you get started.
The first thing that you need to know about how to remove the propeller shaft from outboard motors is what the motor looks like. There are four different designs that have been used, so you will want to know which one you have before you start. If you are not sure what you have, there is a guide available on the manufacturer's website that can help you.
Once you know what the motor looks like, you will be able to find the part you need without any trouble. Remember that the parts that come with the motors are actually small propellers that have been bent into a U shape. You will need to get these apart to properly take the entire thing apart and then reassemble it properly.
Once you know what the part looks like and how to remove propeller shaft from outboard motors, the next step is to find the disconnecting devices that will come with the kit. It is not difficult to find them, but you may have to look around a bit to find them.
When you find the proper device, you will need to take out the cap that is around the screwdriver and take it out. Now, you will need to turn the screwdriver and look for the black "lock" tab that is located on the outside of the plug.
This will always be on the left side of the plug, so make sure that you turn it clockwise until it clicks into place. You can now remove the old connection that has been creating a lot of wear on your motor.
Next, you will need to take out the correct tool for the type of motor that you have. Be sure that you know which one you have before you remove it from your motor.
You will need to turn the motor over and look for the tab at the top of the motor. You will then need to carefully lift the motor off of the shaft and carefully pry up the shaft from the motor.
Do not force it, as this could break your motor and it will be very hard to fix. You will need to use pliers to twist and turn the shaft to loosen it up a bit.
After you have loosened the shaft up a bit, you will need to carefully pull the shaft off of the motor. It is important that you don't lose the tabs or you will be back where you started.
Remember that you should never try to pry the shaft all the way off unless you are an experienced mechanic. It is not very hard to repair if you do not pry it completely off.
Remember that if you want to be able to how to remove the propeller shaft from outboard motors, you will need to have a good knowledge of how they work and where to find them. If you have a basic understanding of what you are looking for, then you will be able to finish this project quickly and efficiently.
