Universal Joint | Tips For Installing on a Driveshaft-Jiangsu Sitong Cardan Shaft Co.,Ltd
Welcome To Jiangsu Sitong! We are Professional Cardan shaft manufacturer.
  +86-18852632222 丨    lynn@cardanshaft.com.cn

Universal Joint | Tips For Installing on a Driveshaft

Views:85     Author:Cardan Shaft Manufacturer     Publish Time: 2020-07-23      Origin:Sitong Cardan Shaft Co.,Ltd

Changing the universal joint on the driveshaft to a new design is no easy task. The universal joint on driveshaft is one of the joints that run through your driveshaft. This means that your driveshaft will need to be re-install if you wish to replace it with a new one.

universal joint


The universal joint runs through your driveshaft and is responsible for keeping your transmission in good condition. As your vehicle runs on a series of transmissions, each one will come with its own universal joint. The joints that run through the universal joint will run along the transmission. When you start to notice your transmission losing its fluid, it is time to replace it with a new one.


The universal joint can be easily accessed through your vehicle's engine. The part is located on the transmission's transmission side. If your vehicle's transmission does not come with a universal joint, you can still have it changed.


Once you have the new universal joint installed, you will have to make some repairs to your transmission. The first thing that you will need to do is disconnect the vacuum lines. Once you have completed that, you will need to disconnect the engine's air intake.


Next, you will need to remove the vacuum source. This is a good practice to make sure that there are no leaks in your vehicle's air filter. After that, you will need to disconnect the engine's main fuel lines. Make sure that the fuel lines are connected to the fuel lines of your vehicle's engine. The universal joint on driveshaft is located under the fuel tank.


You will need to disconnect the fuel pump and reconnect it to the engine. You can also disconnect the ignition relay if it is not working. After that, you will need to disconnect the battery's negative cable.


Next, you will need to remove the battery's positive cable. You can do this by taking the battery out of your vehicle. Then, you need to disconnect the negative cable from the engine's main terminal.


The last thing you need to do is to remove the universal joint from the transmission. You will need to disconnect the new universal joint from the transmission's main terminal. and then replace the new joint with the new one.


Once the new joint is in place, you will need to reconnect the vacuum lines and remove the transmission's transmission side cover. After that, you can start the transmission by inserting the new joint into the engine's ignition and turning it on.


After the transmission is turned on, you will need to check the battery's voltage. Make sure that the battery's voltage is at least four-hundred volts and that you have turned on the starter.


Now, you will need to turn on the vehicle's transmission and turn on the starter. Once the transmission is started, you will need to check the transmission fluid levels.


If you see any fluid leaks in the transmission's transmission side, you will need to remove the transmission's transmission side cover and check the hoses. If you do not find any, you can put more fluid and check them again.


You will need to disconnect the main engine's power source and reconnect the transmission's hoses to ensure that it is working properly. After this, you will need to turn on the engine and check the condition of the engine's transmission fluid.


If the engine's oil level is low, you will need to check the oil filter. If you see any dirt particles in the filter, you will need to replace the filter and then check the oil pressure.


If you see any leaks in your engine's engine, you will need to turn on the vehicle's engine and check the condition of the transmission fluid and the engine's cooling system. If your vehicle's engine is running slow, you will need to replace your universal joint.


If you are not able to remove the universal joint from your vehicle, you will need to check for leaks in the transmission's hoses and the cooling system. to ensure that your vehicle's engine is working properly.


We have first-class production line and strict management system.

Contact Us

江苏四通机械制造有限公司
Jiangsu Sitong Cardan Shaft Co.,LTD
Tel : +86-523-84549777
Phone : +86-18852632222
E-mail : lynn@cardanshaft.com.cn
Whatsapp : +86-18852632222
Skype : sales@nskfagbearings.com
QQ : 510994342

Contact Us

Copyright 2020  Jiangsu Sitong Cardan Shaft Co.,Ltd All Rights Reserved. 网站地图 Sitemap