Industrial Cardan Shaft for Lifting-Jiangsu Sitong Cardan Shaft Co.,Ltd
Welcome To Jiangsu Sitong! We are Professional Cardan shaft manufacturer.
  +86-18852632222 丨    lynn@cardanshaft.com.cn
Industrial Cardan Shaft for Lifting
Home > Medium Duty Cardan Shaft > Type A With Length Compensation > Industrial Cardan Shaft for Lifting

Industrial Cardan Shaft for Lifting

5

Length: follow customer's requirements
Surface Treatment: Painting
Color: customized
Min order: 1 set
Material: follow customer’s requirements

Quantity:


For more dimensions and drawings about industrial cardan shaft, you can click "Service" and download.


The following are dimensions and drawings of SWC-BH cardan shaft with length compensation as a model.



Our min order is 1 set. Most of our products are customized. Each order from our factory, we always produce cardan shaft after customer confirmed the drawing. So we didn't have stock. And since we are based on final customer confirmed drawings production, so before this, customer has any needs can be adjusted.

We do manual measurement and dynamic balance test of industrial cardan shaft.


How to do manual measurement of cardan shaft for lifting?


The inspectors measure the length of the industrial cardan shaft for lifting, the size of the flange,  the number of holes on the flange and its diameter according to the drawing.


 

How to do dynamic balance test of lifting industrial cardan shaft?


According to the customer's lifting industrial cardan joint r/min and accuracy level parameters do the dynamic balance test, if any problems with the test, we will add the balance block at both end of the industrial propeller shaft for lifting, and then continue to dynamic balance test to know the results of the lifting industrial universal joint shaft test to meet the min and precision level parameters.

If you buy our lifting industrial cardan shaft, we will provide following services:



1.For domestic customers, when we receive customer complaints about cardan shaft for lifting, we will send technicians to the spot, analysis the cause, and help solve the problem.


2.For customers abroad, we will ask them to send photos and vedios of the problem industrial cardan shaft for lifting, our technicians will analysis the cause, and give the solve guidance to customers.


3.General speaking, there is no quality problem of our lifting industrial transmission shaft, we produce strictly according to the detailed drawing. The problem is always caused by wrong maintenance. Please note to add grease for the spline and cross cardan frequently. Usually once a month, for cars, once per 15 days.





Previous:Industrial Cardan Shaft for Rolling Mill

Next:Industrial Cardan Shaft for Cement Mill

Related Products


We have first-class production line and strict management system.

Contact Us

江苏四通机械制造有限公司
Jiangsu Sitong Cardan Shaft Co.,LTD
Tel : +86-523-84549777
Phone : +86-18852632222
E-mail : lynn@cardanshaft.com.cn
Whatsapp : +86-18852632222
Skype : sales@nskfagbearings.com
QQ : 510994342

Contact Us

Copyright 2020  Jiangsu Sitong Cardan Shaft Co.,Ltd All Rights Reserved. 网站地图 Sitemap