Medium Transmission Shaft for Power Industry-Jiangsu Sitong Cardan Shaft Co.,Ltd DOCANDO INTERNATIONAL INDUSTRY CO.,LIMITED
Welcome To Jiangsu Sitong! We are Professional Cardan shaft manufacturer.
  +86-18651162958 丨  
Medium Transmission Shaft for Power Industry
Home > Medium Duty Cardan Shaft > Type E Double Flange With Length Compensation > Medium Transmission Shaft for Power Industry

Medium Transmission Shaft for Power Industry


Length:follow customer's requirements
Surface Treatment:Painting
Min order:1 set
Material:follow customer’s requirements


For more dimensions and drawings about industrial cardan shaft, you can click "Service" and download.

The following are dimensions and drawings of SWC-BH cardan shaft with length compensation as a model.

Our min order is 1 set. Most of our products are customized. Each order from our factory, we produce medium transmission shaft  after customer confirmed the drawing. So we didn't have stock. And since we are based on final customer confirmed drawings production, so before this, customer has any needs can be adjusted. 

Please advise us the main sizes of medium transmission shaft, such as diameter of across assembly, total length, and the swing diameter of flange, then we can provide you our drawings according your request, or please advise us the model you are using now.

The packing of medium power transmission shaft is as follows:

1. The medium power transmission shaft is wrapped by plastic film then waterproof paper, finally the wooden case.

2. Single carton packing was specially for small piece.

3. Can be packed according to your requirements.

Delivery: delivery time of medium cardan shaft is usually 10-30 days by sea or air, according to your quantity.

To control quality of medium drive shaft ,we do manual measurement and dynamic balance test.

Manual measurement of cardan shaft for power industry:the inspectors measure the length of the drive shaft for power industry, the size of the flange, the number of holes on the flange and its diameter according to the drawing.


Dynamic balance test of cardan shaft for power industry:according to the customer's drive shaft for power industry r/min and accuracy level parameters do the dynamic balance test, if any problems with the test, we will add the balance block at both end of the drive shaft for power industry, and then continue to dynamic balance test to know the results of the drive shaft for power industry test to meet the min and precision level parameters.

Previous:High Quality Steel Cardan Shaft for Rolling Machine

Next:Double Flanged Type E Cardan Shaft Flexible

Related Products

We have first-class production line and strict management system.

Contact Us

Jiangsu Sitong Cardan Shaft Co.,LTD
Tel : +86-523-84549777
Phone : +86-18651162958
E-mail :
Whatsapp : +86-18651162958
Skype :
QQ : 639068832

Contact Us

Copyright 2020  Jiangsu Sitong Cardan Shaft Co.,Ltd All Rights Reserved. 网站地图 Sitemap