Length:follow customer's requirements
Min order:1 set
Material:follow customer’s requirements
For more dimensions and drawings about industrial cardan shaft, you can click "Service" and download.
The following are dimensions and drawings of SWC-BH cardan shaft with length compensation as a model.
Our min order is 1 set. Most of our products are customized. Each order from our factory, we produce cardan shaft flexible after customer confirmed the drawing. So we didn't have stock. And since we are based on final customer confirmed drawings production, so before this, customer has any needs can be adjusted.
Please advise us the main sizes of cardan shaft for machine repair, such as diameter of across assembly, total length, and the swing diameter of flange, then we can provide you our drawings according your request, or please advise us the model you are using now.
The packing of cardan shaft flexible design is as follows:
1. The machine repair cardan shaft design is wrapped by plastic film then waterproof paper, finally the wooden case.
2. Single carton packing was specially for small piece.
3. Can be packed according to your requirements.
Delivery: delivery time of cardan shaft design is usually 10-30 days by sea or air, according to your quantity.
To control quality of transmission shaft flexible design, we do manual measurement and dynamic balance test.
Manual measurement of propeller shaft in machine repair: the inspectors measure the length of the machine repair cardan joint design, the size of the flange, the number of holes on the flange and its diameter according to the drawing.
Dynamic balance test of machine repair cardan joint design: according to the customer's cardan joint for machine repair r/min and accuracy level parameters do the dynamic balance test, if any problems with the test, we will add the balance block at both end of the cardan joint flexible design, and then continue to dynamic balance test to know the results of the cardan joint for machine repair test to meet the min and precision level parameters.